Button size

Yeah that looks right, I’ll have to check into that

 

Click "You" at the top, then Personal Details:

 

Likely not plug and play but it should be easy enough to repin.

also, if you go into your "you" page you can select your profile and change your vehicle info

 

Thanks, just figured that out

 

Once you get to 50 posts you can use the classified section.

 

I went with Meso as well. The is nothing to fill that spot. As a bonus I got rid of the cig lighter as well. Found that to be super useless.

 

Yeah I’ll probly buy a new lsp whenever they are back in stock and go with all switches except the rear slider

 

I’m gonna cut a hole in my 3tpam and flush mount a data port there so I can just use a real short cord for my carplay

 

I just did this to myself. I completely installed and glued my @MESO lower switch panel (which is nuts taking your entire truck apart) and the last switch I go to install is the USB and it's the wrong size.

Anyone know / figure out what size hole that is? Or what switch I can get my hands on to fill it? I thought about shaving it but I'd hate to do that to such a badass switch panel. Ordered the LSP7C and that USB square isn't going to fit anything.

 

Sorry about the confusion. LSP7C Denotes;
Lower
Switch
Panel
7switch holes
C CarPlay

CarPlay is only found on the newer model trucks (2020-up?) which has a smaller, square USB hole. All other vehicles have a regular USB switch hole (“B” size”) which is the same as all the other switch holes.

 

Yeah this is definitely on me. I had no clue about the USB size change in the 2020+ and just wanted to keep my USB there but like I said, I don't really need it bc I have a nice one that plugs into the cig lighter. So all I really need is something to plug that weird square hole. Switch blank, actual switch, OEM 2020+ USB switch, anything. You have any recommendations?? Thanks for the reply!

And the switch panel looks KILLER. Well done as always!

 

I can design and 3d print a filler cap for that. Or, maybe look for the part number of the CARPLAY outlet and see if it will
Plug into your radio(CarPlay prob won’t work) but maybe for charging..?

 

Man that would be awesome. Let me know what to do to get that filler cap knocked out. I'll look for the part number in the mean time.

Also, I'm sure you know this but check the pic below. Is that just an extra in case of an upgrade? As I reinstall I have no clue what this 6th plug went to and I don't want to reinstall and mess it up. Thanks in advance!!

 

Do you have manual or dual zone climate? I know some of the trucks with manual climate(mine included) have the extra harness(not used) that is for the digital climate/dual zone display.

 

Yeah I have manual climate. I figured it was extra. Just one of those head scratchers that would've messed with me if I didn't ask before sewing it all back up. Thanks man!

If anyone knows the part number (or name) of the carplay button/switch let me know! I don't even need it to connect to anything really. Just fill that hole until I can figure something out. Now that I look at it, I could just carefully cut a notch so that a small style custom switch would fit. I just hate to take a dremel to such a badass switch panel!