2021 Tacoma TRD Pro leaf pack question

Damn, I just bought the Icon AAL. Haven’t installed it yet but I might have to return it. I didn’t even think about what it was rated at with a load.

I just ordered most of what you mentioned, the Westcott front lift, Icon AAL, 285/75/16 DuraTracs, and a MX4 bed cover lol.
With the RSI cap on, Did the Icon AAL go from 1.5” lift to -.75 for a total drop difference of 2.25” or did it go from 1.5” to 0.75” lift? Also, did you install the Westcott spacer with the AAL or did you remove the AAL and just run the Westcott spacer? Thanks!

 

I did the Westcott Design front with the Icon AAL first with the cover. Then with the smart cap, it dropped to give me somewhat of a negative rake so i installed a 1" block and now it sits about level (see picture). I would suggest save and get deavers stage 1 over AAL

 

If you carry any weight. Then i would skip the add a leaf and go straight to the icon rxt leaf pack bc you will have options for lift. Its simple to add a leaf in the pack as you carry more or less and want to tweak it.

 

Would you need to extend your brake lines for this setup?

 

I think its recommended by most people because the leaf pack droops more then stock when you off road. But if I was doing level one or two, then i would probably not and see how it goes.

 

Deaver U402 Stg3

 

This does not look level...you still have rake, unless it's a bad angle. I don't understand for the life of me, the amount of people who run $50,000+ modded rigs, only to run crappy blocks and AAl for suspension. But I digress...