Suspension lifts for a 1998 regular cab?

I got a 98 reg cab Tacoma and I wanna fit 33s with a good amount of room for flex . What are some good leaf springs and coil over lifts that aren’t too expensive and will ride a little more soft on a reg cab?

 

OME 881’s and their leafs with the third leaf from the top removed.

 

How much lift is that?

 

With any added weight like a heavy bumper or fiberglass shell, you should get close to 2.5" up front and about 2" in the rear. I ran that set up on a reg cab a few years ago and I liked it a lot. Even with a bumper/winch and shell, it cleared 33x10.5r15 on 15x8 wheels with 3.75" backspacing.

I sold it to a friend who put 285/70r17 on 17x9 and the extra width made it rub a bit when fully flexed.

 

Sounds like exactly what I’m looking for. Thanks for the info

 

You may want to consider UCA’s as well at some point to increase your caster. This will minimize rub