286k and my truck is so loose when steering

replaced whole front end last 2 years

new wheel bearings
upper CA with BJ
Lower CA with BJ
new stabilizer links
new stabilizer bushings
new rotors, pads, calipers
new steering shaft and rack done 4 years ago

jacked up last night, its all tight, nothing loose

When driving, feels like my stabilzer bar isnt doing anything and truck is all over the place when windy

 

Is you truck lifted?

Have you checked the alignment.
Caster can cause the truck to feel like it’s “all over the place”.

 

I have gen 3 struts on and the new learfs from recall. so front is only raised an inch maybe

. was aligned last year.

 

Inner and outer tie rods?

 

What about the coilovers? How old are they? How old are the springs and what weight (600, 650 lb)? How much weight do you have on the front end?

 

The stabilizer bar does not assist with windy conditions; it’s to counter leaning when the opposite end goes up, which happens when the truck leans to one side like when you turn.
You don't mention if you got new inner/outer tie rods. Also, what brand control arms you get? The BJ’s in my Dorman LCA’s were shot with less than 1500 miles.

 

its a stock truck with gen 3 shocks n struts bought two years ago

LCAs a toyota part
new inner and outer TR

 

looks like my passenger tire is closer to the cab then the drivers by an inch, ill take in for an alignment this weekend