Behind Rear Seat MOLLE Panels

I am not exactly sure what you mean by a cover, I do have panels with no power window cut out but you would need to modify the power window motor brackets to make it fit.
I do have a 3d printer that i could possibly print a plastic cover but that would an extra charge due to a custom made part.

Let me know what you think, thanks!

 

@TacoTuesdayNJ

I do have access cab panels (with MOLLE) left. I would just need to know if your tacoma has the child seat restraint hooks

 

Will you be getting any with out the Molle anytime soon?

 

I will be making another batch of panels in 3-4 weeks and could add a blank panel to the order. The metal shop would require a minimum of 4 panels and they are still the same price as the MOLLE panels. This is due to the low volume. If there where say 16 on an order it would be cheaper

 

Fair enough. if that's the case, I may be in on that instead. I will get back to you in a week or two. I'll just PM you then. Thanks!

 

I’m in for a window cut out version. I have a gen 3 taco. Please pm me details.

 

GROUP 3 (Special requests)

This will be a low quality group buy for those looking for custom panels.

There must be least 4 of each panel type for this to work (more is better for $$)

ACCESS Cab BLANKS (No MOLLE pattern)
$315-330 each (estimated)
1.
2.
3.
4.

2nd/3rd Gen DOUBLE Cab BLANKS (No MOLLE pattern)
$315-330 each (estimated)
1. @payder1
2.
3.
4.

GoFastCamper MOLLE
1. @HoytK9 3G Taco GFC V2 with window
2. @HolyReptar Taco with window
3. @thebaker 2G Taco. GFC V1 No window (possible local pickup)


And.... Any other designs??

 

I will be out, I ended up going. Different direction, didn't think there would end up being 4 people. Thanks for looking out!

 

ACCESS CAB OWNERS

The child seat restraint latch holes have been sorted out. Those who needed the holes have been addressed via PM and the panels shipped.

I am receiving feedback that some access cab panel mounting holes don't line up. I have contacted the person I bought the design from. His response was "yea sometimes that happens" which is NOT acceptable to me as I paid for a design that was supposed to fit properly!
Needless to say I'm pretty upset as not only did everyone pay for a panel that should fit but it's embarrassing that I sold something that might not fit.
I guess if you want something done right you have to do it yourself soo...

I need to find a 2nd gen, 2.5 gen and 3rd gen access cab near Orange County CA I can personally verify fitment and make the necessary updates. Compensation for your time/travel can be discussed if required.

Anyone who received an access cab panel:
Please let me know if you had any fitment issues or if it fit properly as well as the year and trim level of your access cab.

My intitial plan is to figure out what hole locations need to be modified and send out a printable template to perfectly align where to drill a new mounting hole. I believe the issue is only with the lower 4 holes.

Your feedback is greatly appreciated.

@BudFriendguy
@seabag
@Saulgoodyall
@supersizejm
@DonnieUtah
@EasyDoesIt
@AndrewO
@TacoTMtm
@notbryon
@Truckitect
@BF738

 

Just about done. Need to cut the plastic bin down for the OEM subwoofer. Also going to add spacers so there's room to stick my fingers thru the holes.

- FatMat sound deadener
- Vinyl fabric

 

I'm interested in one for my 2014 access cab. I DO have the child seat latches. Do you have one with driver's side molle and passenger side blank?

 

I only have full MOLLE pattern panels at the moment. I posted a few posts up about generating interest in a blank (or 1/2 blank) panel but doesn't seem to be enough interest to meet the minimum order quantity needed.

Version 2 of the full MOLLE panel is almost completed. This will include holes for the latches.

 

Ok, do you know when version 2 will be ready? I’ll take one.

 

The metal shop lead time is between 2-3 weeks from the date I submit the design (hopefully Friday)

The catch is that I need to sort out what year the access cab changed the mounting points on the rear cab wall. Version 2 is based on a 2016+ Tacoma.
The current panel also does fit certain models but I have yet to hear back from anyone on the 1st batch with a

$90 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)

2005-2015.

All current inventory of version 1 access cab panels will be sold at a discount ($260 shipped) as they will fit any 2005+ of a few holes are drilled.
It also might fit fine, it's been very hard to get an AC Tacoma I'm my shop to 3D scan.
Apparently they are not too common

 

Hmmm…. I don’t mind drilling or grinding a bit. Can you send me a picture with measurements? Then I can see what I’d have to do to make it fit

 

I only have pictures from a 3rd gen Tacoma but the process will be very similar. As far as I can tell the hole alignment is off by less than an inch.
I'll upload the pictures in a hour or 2 (at the gym now)

 

This is from a 2021 Access cab and the Version 1 MOLLE panel.


The arrow points to the top of the threaded hole in the cab wall (just barely visible). These holes need to be drilled in the panel to fit.

 

thanks for the great pics, that’s very helpful. I’ll take a look and some measurements on my truck tomorrow and get back to you

 

If there is someone near Orange County CA with an access cab I can 3D scan this will be much more accurate.
I can compensate for time/travel if need be $$ or large discount on a panel.

If anyone is feeling ambitious these are the measurements I need to verify. They need to be as accurate as possible.
I've found using a tape measure works fine provided you start from the 1" mark then subtract 1 from the total measurement. This removes any error from the hook at the end of the tape measure.

Any arrow that ends at a hole or bolt should be assumed to be a center to center measurement. G, H, and K should include the carpet thickness.

 

Can’t see the pics posted above, here’s my 2014 base model access cab with the child seat hooks. What do you want me to measure?