What Have You Done To Your 3rd Gen Today?

I used the Ridgid cordless 3” cut-off wheel tool. I love that thing. It’s much better than an angel grinder.

I did not install my front bumper, but I did cut and install my rear high clearance bumper

 

Picked up some steps/rails.. previous owner modified them so they were closer to the body!

 

Continuing the path if an OEM plus build. Washed my truck a week ago to rid if of salt and brine from the NE and make a recovery kit out of a gun case I had laying around.

 

I’ve got the same steps, can you show where and how they were modified to bring them closer to the truck?

 

ooohOOOHoooh!

 

$213 K&N 57-9039 K&N Cold Air Intake System: High-Flow Air Filter, Increase Performance & Towing: Compatible with 2016-2023 TOYOTA Tacoma, 57-9039

K&N 57-9039 air intake system along with the TRD intake flow accelerator(PTR03-35160-AE.) K&N kit comes with a high flow air filter and intake tube. I was looking at a Flowmaster kit, but after doing some research, realized I needed a CARB compliant kit here in MA. This was the only one I could find. I don't really need the extra HP or noise, but am hoping to see a slight bump in mpgs.





I have no idea what this giant box attached to the factory intake tube is for, but I'm hoping it's nothing important.

 

Ordered the lock kit for the truck bed on black friday and finally got around to feeling like it was warm enough to install it. Kind of a PITA tbh without lifting the truck and should've just came installed.

 

Your fire extinguisher might fit in a door's drink holder. I got mine in the rear driver seat. Could be useful if you need it quickly

 

It gets smaller the longer you own it.

 

Following up here using the Blaze Off-Road mount with some pro tips:

• Get the bus bar and fuse block and mount them with the switch
• Reorient the switch so the positive lead comes out toward the cab
• You need a washer to secure the Cali Raised fuse holder with a smaller diameter nut (M6)

 

New longer brake lines and diff breather extension.

BUY THE WRENCH - I almost didn't get one fitting off, three went fine, last one of coarse stripped a little. After getting a flared wrench I almost didn't get it off - just go buy a fleared wrench.

More slack at extension, now the electrical lines/loom are the limting factor, although since more in the middle should be arrected less by a stuffed, droop situation.

 

Can't just pass by calm...

That's what SHE SAID!

 

You’re welcome brother.

 

thank you! That’s super helpful and I’m gonna look into doing the mod this weekend! Great pictures

 

Oh boy!!!!

 

I was under the impression that the projector did a good job at cutting off the beam and helping me!

in Canada the TRD OR premium didn’t come with the led style headlights https://www.theretrofitsource.com/i....040.jpg?resizeid=117&resizeh=768&resizew=768

 

Today, I removed the grille lights, removed the shackles from the front bumper, re-painted the hitch skid, and replaced the square tube base on the Yakima swing daddy bike rack.

 

Recent mods to Finn:
Meso Map and Dome LEDs - white
Desert Does It Seatjackers and Molle brackets
Redline Max hood struts

 

No one knows what that big square box is for.
I got rid of mine 2 years ago.