Wire damage.

Rodents ate wires on top of wheel drivers side. Not sure what they are (AC relay?). Anyway anyone have a pic of what they should look like. I'll splice in a fix once I see how it should look. Thanks

 

Damn that sucks! Not sure how much this helps since the tape is still on but here is a picture of mine.

 

just cut out the damage, one wire at a time and splice color to color. Then you can just tape up and put some sort of protection (loom, tape, etc)

 

That is the wiring for the relay for the power inverter that powers the bed outlet, just match up the wire colors and use the correct gauge wire to splice it back together. And then either get rid of the critters or park somewhere else so they don't do it again.

 

That’s an easy fix.

 

You got lucky. They seem to like the taste of the knock sensor wires.And that’s a huge job.

 

That’s the inverter relay harness.

Reconnect the corresponding wires back together.

 

Decon rat killer. Green biscuits threw one on my engine bay near firewall never had problems since here

 

Also on Motortrend channel truck U towguys garage. Etc. mouse blocker
Turns on when key is off. And turns off when key is on
Sound I think that kills their ears and small strobe lights