OME kit installed

Went with 887 up front, Nitrochargers all around and EL111R in the back. Rides much better than the sport suspension and so far no squeak.

 

Looks higher in the back, what gives???

 

Old Man Emu lifts are designed to keep some of the rake.

 

It maintains the factory rake. I was not looking to level

 

What size tire? Factory wheels?

 

265/70 on FN Pro. I will probably go to 275 or 285 soon

 

I just finished most of my wife’s build. OME lift 886 up front and the +660# springs in the back. Also added a coastal off-road high clearance front bumper with 10k warn witch weighed in around 180#’s. Leer canopy gets installed next week. I also put the spc upper control arms in to gain clearance by the cab mount/mud flaps. Now I need tires, probably going to go with the 255/80R17 in toyo at3

 

i added the SPC too. Will switch to 886 if these end up sagging

 

What position did you put the ball joint in? I put it at F and dialed the lower control arm to push the tire forward.

 

i did the same. Didn’t need to go to G