Multiple Receivers Rear Bumper

I am looking for a company or someone who has a solid high clearance bumper with multiple receivers. Ideally three. One for towing (center) and two on the outside of that (left and right) The purpose is to mount a dirt bike hauler. The hauler will have three attachment points, one to the towing receiver and then to the remaining outside receivers. The point of this is to eliminate the bike rocking and twisting in the single receiver. I have seen these fail multiple times and I will be using it offroad. I am open to suggestions/alternatives. But, I will not use a trailer and I will not be loading it into the bed. It will be mounted onto the rear of the truck and it will have a minimum of two points of contact.

I'm sure you or a buddy has had success with single receiver mounted haulers, I just don't care to hear about it.

Here is an idea I'm talking about

Thanks for looking!

 

Best bet is going to be to find a local fabricator and have him build exactly what you are looking for. That's what I did for my rear bumper, I wanted a single sided swing out that would allow me to use the barn door of our canopy without swinging the tire. Local guy knocked it out of the park.

 

Yeah I've started talking to some local guys. Was just looking if something was already prefabricated and get pics to show them

 

@judgEd, I'm looking for the exact same thing. Please update this thread if you figure something out. I'll update here if I get one made or make one myself (excuse to buy a tig machine)