Best wheels for clearing 35’s?

Yeah I realized I already stalked your thread now

Guess it is why I am looking at the scs 17 x 8.5 -10mm

 

Get which ever wheel you want and add the appropriately sized wheel spacer. I have Icons with a 4.75 backspace. I added 1.25" Spidertrax wheel spacers. Now it's a 3.5 backspace.

 

So, I've been reading and reading, and did some more reading. I'm trying to figure out if anyone ran 35/11.5/17 trail grapplars on these SEMA wheels(17/7 4.5 bs)? I'm currently running 285-70-17 ridge grapplers with 0 rubbing. I'm trying tp figure out if i'll clear the uca and trying to avoid rubbing the frame, and I don't want to run spacers. I am aware however, that I will be doing a lot of other cutting. If I can't get this to work, I'll probably just run 285/75/17 or the Kenda skinny 35's. Appreciate any input on this.

and I'm set up with 2 in lift with camburg uca's.

 

I hope your doing something to the front end of the truck . It looks like poop .

 

Old post but I have the same wheels and need to run 1.25 spacers to clear my spindle

 

You will rub with the 16, I have 16x8 4.5 o offset and I have to run 1.25 spacers to clear