What Have You Done To Your 3rd Gen Today?

Nice

 

Picked up my friends 2000 miles used tires.
500$
Got to order the last wheel and lugs then im ready to go.
Can i transfer my TPM or do i need to buy new ones.

 

you wanna keep your tpm’s. Americas tire and discount tire will program them to your truck for you when they install them and mount/balance your tires

i did the same thing you’re doing on my last set of tires, just take it all to americas tire or discount tire and have them do it all

 

Did you remove the surround or just schlep the vinyl in place? It’s the last of my chrome too and just been avoiding it

 

^^ what he said, although I have heard some aftermarket wheels require I different shaped TPMS so not sure I’m your case

 

Thank you.

 

I like that! how much and where? @chuam

 

It’s really easy! Just go slow and low, checking the visors often. They will peel right off, and a paper towel under the same temp iron will get rid of the residue no problem.

There’s steel and aluminum tpms sensors. Only difference is the angle of the valve stem. Steels are greater angle. I’ve read around here that you can install the steel sensors in aluminum wheels, if you flip them “upside down” (180 degrees), but that some tire shops aren’t into that.
Installed a set I bought from a member here just today, after finally locating the right sensor service kits. He sent them without valve cores and two were missing washers, but Napa had the service kits 4 for $15 so no biggie.
Now I’m just hoping the sensors are all good! He said they were off a ‘21 so fingers crossed!

 

We have a family run tire place that will do whatever i ask. Just hope they fit.

 

Those rims are gonna look sick on your truck brotha!

 

Thank you, i hope so.
I got 2 super cheap off Craigslist so these are what im going with.
I hope they look good.

 

They will! Which Methods are those? I don’t think I’ve seen those ones before (or at least recognize them).

 

Nightmare fuel.

 

Pro tails added today, easiest mod I've done in a while by far.

 

Oh haha they’re the NV 305s! I was looking at those, I’ve just never seen the bronze with the black lip. They’re sweet looking, thanks for showing me

 

i did the same and gained 5hp! Jk but i love em

 

those look cool with quicksand- dig up some pics on here- several guys have done it-

 

Method 701's mounted today. 16x8 zero offset. Waiting for some black lugnuts.

 

Ill search around.
Im still working on finding or making a decent center cap. The center caps that come with them are fugly