What Have You Done To Your 2nd Gen Tacoma Today?

Have a link to the specific shaft that fits the splines?

 

Do you have a link for the 2015 2.7L 2wd prerunner one you mentioned please? Mine has a 6 lug pattern so I guess it's not the base model.

 

https://www.talonsgarage.com/product-page/copy-of-2005-2015-toyota-tacoma-2nd-gen-2x4-only

Here you go sir!

 

Be still my heart
Holy crap

 

Installed my new Fox 2.5 Performance Elite Series front coilovers and rear shocks. It was a big mod for me and spent a good amount of time dialing in the preload (with coil compressors).
Time to take it off-road and check out the differences!

I'm protecting everything, so no glorious picture with the Fox decals.

 

or set down the purse and put the $8 seal yourself
Tried that a couple times worked out great

buddy of mine probably makes $50/hr
That’s what it would cost for him to wash my laundry for me
So I do my own laundry
Detergent from Costco, eyeballed amount, etc

 

Let's talk pm me

 

Test fitting my lights, do have a pair of the fogs that’s currently on my truck that will be going between the SSC2 and SS5. Also missing the SS30 bar that’s currently on my truck as well.

 

I appreciate it Steve, thank you

 

Thats going to be INSANE! In the best way possible.

 

The item number i have for the joint is UA108100. You need to make an adapter to fit the oem shaft into the hole, the other side (with spline) fit perfectly on the steering rack.

For anyone who don't have the skill/time and want one, you can contact them here . They use the old one so you need to provide a core for the job. If you are anywhere in Canada or even in the north of the USA i'm sure it's still very worth it even with shipping. Job and parts cost a little less than a new oem, but the heavy duty nature of the joint and the rebuilt option is a no brainer. Pay once, cry once. I like when it's overkill !!

 

I'm jealous....

 

Color matched grill surround and emblem. Bye bye chrome!

 

Wet Okole seat covers, Timbren bump stops, and Crown braided/extended brake lines.

 

Had to cut off the right recovery point to make this work.

 

Built a carrier on the rack to pick up some 16' base moulding.

 

Did you actually remove the outer bezel (surround) from the center base piece or just mask it off? Unfortunately the 05-11 grills are goofy with the way those two pieces attach via plastic tabs that are deformed/melted. Wish they were like the 12-UP grills that are simply screwed together.

 

Finished my 12v water pump for the truck bed. Pump is mounted on a trimmed down kitchen cutting board & bolted to the bed rail. Powered from the dc plug on the Blue Sea panel. Hoping it comes in handy this summer camping, beach days, cleaning up the dog, etc

 

I just got some Husky X-act Contour floor mats. They fit perfect, but clips don’t line up with the truck. 2010 access cab, the item number is correct based off their website and what is stamped on the mats.
What they look like, holes in line.

The holes should be offset like these.

Do y’all just live with the fact that they can’t be clipped, or go with a different brand?

 

Nice job! I am about to tackle this soon. Just finished up mounting a 15gal tank in the spare tire area a couple weeks ago, now I just have to plumb/wire it all up.