Yota mafia rock lights to switch pros

I currently have the Yota mafia rock light kit hooked up and recently bought a switch pros I want to know how I can bypass the whole bed light switch and run it directly from the switch pros. I’m thinking I’d have to do something with the trigger switch

 

If you re-read the install instructions, you'll see what you need to do.

 

ive read that. However from what I understand that switch would be for the bed light to turn on and off. I want to run only the bed lights off of the switch pros so they aren’t connected to the bed light at all.

 

Look closer to the pic I posted. The arrow shows where the added light system ties into the Cargo Lamp switch...that is the actuation source to the added lights. Remove it from the T harness. Remove the t-harness from the cargo lamp connectors.
Verify that the black wire from the relay requires a ground or a fused power source. That info is needed to set the switch pro circuit you'll be using.