Best 3”-4” lift for 2.5 gen Tacoma

I mean if you can swing it I would do all three, that would be most ideal, but if that's a little out of your budget right now I would get the 5100 with 887s OME coils, OME Dakar rear leafs and upper control arms, that will at least get you lifted about 2 and 1/2 to 3 in and do the point where you can run 33 inch tires which seems to be your ultimate goal, then if you wanted to add an improve that the next thing I would do would be the hammer hangers, then the next upgrade would be the 6112 5120s like in that kit that I linked you.

You will still need a cab mount chop to run 33s but so long as you or a friend has a grinder that's basically free.

 

This thread feels like "Simon says".

 

Ok thank you for your help

 

No problem dude, and good luck with the lift hope to see cool update soon!

 

Front :Matrac spindle, UCA, Bilstein 6112
Rear : Bilstein 5160. 2" lift blocks done