Driveshaft grease fittings,2021 2.7 extended cab 4x4

Just bought 2021 tacoma extended cab 4x4 and I'm wondering if the driveshaft has grease fittings.
My 2007 had grease fittings.
Thanks in advance

 

Best way to know is to look and see..........while you're checking out all the other underpinnings.

 

Welcome to TacomaWorld
It's worth a look under the taco

 

Yes, zerks. Should be (don't hold me to this b/c it's been a minute since I did them and I have a 4Runner too, so I get cornfused) 6 total for the 4wd.

2 on the driveshaft just forward of the rear diff, at the joint. 2 at the prop shaft. 2 more at the other joint behind the front diff.

A few of them are kind of a PITA to access since you have to move the truck slightly to get them to line up right.

 

Welcome to TW!

 

Well I finally crawled under my 2021 4cyl 4 wh drive automatic transmission cab sr extended, even though I get dizzy crawling under things, to look for grease fittings. Now I know, there aren't any! Absolutely no grease fittings! Way different than 2007 extended cab with the v6 engine
Thanks to all for the replies

 

https://www.tacomaworld.com/threads/3rd-gen-diy-maintenance-quick-reference.406712/#post-11409469

Lots of info in this thread.



And another screenshot/comment