Tractors, Mowers, Chippers, Trailers, Chainsaws, Generators, Driveway Erosion Control, ETC.

Head gasket or just leaky valve cover gasket?

This is a vertcle shaft BS 22hp.

Ran great with no smoke at any rpm.

 

Head gasket?

 

I'm leaning that way.

 

If you pop the head off, you should be able to see it if it's failed. Since you have to remove the valve cover anyways to do that, might as well just do both.

I'm sure you were going to anyways. Gasket kits for these things are dirt cheap anyways. FYI, the head bolts are not dirt cheap though...

Head gasket would be my guess as well since it didn't smoke. It's a known weak link on these Inteks due to crappy design.

 

Thank

 

If I had to guess, I'd say H.G.

 

First kill in the new trap!

 

Lengthened the header.

The Kawasaki is narrower than the Briggs.

Head gasket on the way.

 

I have a friend that picked up my Orange this morning and were heading South.

 

Why such heavy hubs/wheels on a such a narrow trailer? What does he normally haul?

 

Got the bracket made and solenoid mounted on the 2,000 lb winch. Now to get it painted and come up with a cover for the solenoid. It'll be perfect for winching stuff up on the small trailer and not having to drag the 8,000 lb one out.

 

82 width iirc.

He huals large tractors, case backhoe and case 480 dozer with it.

 

I guess I'm used to most everybody around here having a deck over

 

just an observation and I am by no means a DOT police but technically the single chain on the rear does not count as 2 attachment points. If your orange is over 10k, it requires 4 points. if that chain breaks, it is only connected by the other 2 chains in the front. enjoy the new machine.

 

Yes we are aware of that, plus he should have CDL A,.... but he has kin within the pohpoh community, and all the state troopers around here have been protecting/defending our border for the past year.

 

Boy is that going to feel good to climb in for the first time. Congratulations & enjoy!

 

Subsoiler work with the Cub 3225. Our rocks here in AR have a little dirt around them.


https://youtu.be/PjrXAU_RP20

 

That thing is a beast! Nice work!

 

Thank you sir! I messed around and built a little Cat 0 top link so I could easily switch to my Sears plows and clean out the furrow.



https://youtu.be/2xjRWagVoXM

 

Since we doing vids...here is my accomplishment for the day.

https://youtu.be/grlktfQFYFk