Ken the electrical guy Q n A

Quick question, I’m installing a switch pros on my truck (2015 Sport 4.0) and I was just wondering which fuses I could use for the trigger wires for my switch pros. I’d like to install in the fuse box if possible. I need an ignition source, dimmer, and possibly hook up to high beams on the 3rd trigger to turn all my lights on at once. Any help would be appreciated. I’ve seen a lot of talk in the 3rd Gen pages, just wanted to verify I was good to go on my second gen. Thanks.

 

First let me apologize if this has already been covered. I’m hoping to be able to use a wire tap to plug in to the overhead wire harness that goes to the mirror to power a radar detector.

 

Aloha Ken!

i just Purchased a 2014 2wd A/C base model.
I’m wanting to update the accessories:
1) reverse camera (done) it had the pigtail connector right on the tailgate handle.
2) now working on keyless entry. I was told if I had power windows, pigtail for reverse camera, and pigtail for chirp/beeper ( in engine compartment) my truck should be equipped for a pigtail to install a wireless remote module located behind the glove box, unfortunately there is none. Atm I have a used remote module and key fob, just nowhere to install. I know it’s a 5 plug with 4 wires ( red, yellow, blue & white/black ). My question: is there a way to tap into the existing wire harness? I know having the Wire diagram for this component will help, but I’ve had no luck finding one. Let me know if I can get you any information on my end that could help. thank you in advance!

 

Thanks for starting the thread! I have a question, When I put my truck in 4wd does the t case send a signal to the diff actuator so it will engage?