Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

I just need to get the caliper mount brackets I designed yesterday back from water jet (hopefully today) ... gotta love the next day turn around from the people we use

 

Sweet, it already has the custom artwork I requested!!

 

What are these holes for?

 

UBolts for us losers still with leaf springs.

 

As @Airdog said they are for the u bolts. I made them a little wider to accommodate the different spring perch widths based on what spring under kits people have

 

what !? you couldn’t use all that influencer income stream to upgrade to links ?

 

I’ve done all my own work to do date but damn that was a bitch. Quality product and super happy with the results though. I might just leave it like this without the fenders. Looks kind of badass.

I know yall hate on dorkels but I’m going to take a hole saw to my intake exit and mount one up. Lol.

 

fuck the haters, dorkel lyfe for evah

 

How close do the tires come to hitting the inners on the stock length setup? Still unsure if I want to do these and maybe modify them a little or just have a custom tub job for the 37s

 

I’m having some trouble with the fuse box mounts, seems I’m not doing something right.

 

what's the issue?

 

What’s is everyone doing with this portion of the inner fender? I have a few ideas but would like to see what others have done as well. Thanks

 

I

Im storing dirt in there currently.

 

Cut it flush with the cab but be careful not to completely cut the cab seam apart

 

I made a relief cut at the end and hammered it flat with the firewall. Then cleaned up the vertical piece that was left. The remaining inner fender was about an inch wide. I haven’t done it yet but planned to throw some seam sealer on it.

 

I have the 2nd gen fuse box mount welded on the inner fender and I have the little z shaped piece that hold the long arm on the side ditches from the engine. But the only one that I can get a bolt in is the z shaped piece. The other doesn’t align for another 3” and there’s nothing at all for the side near the battery tray.

 

I'm going to weld one of the 3 random brackets that was included on the kit to the battery tray side for that 3rd support. The direction allured to this but don't show the bracket in the pictures. Do you have any pics to show?

 

I used the welded tab on top of the wheel well portion, and the Z bracket. Cut the tab from the fuse box, drilled a hole though it. I didn’t have the resource to weld the stud to the top of the bucket. I just drilled a hole, used a longer bolt and a bushing for the tab by the bucket. Just not in this picture.

 

I used one of the small triangle tabs on the battery tray mount for the one tab. The big one that sits on the inner I had to drill offset from the provided pilot hole because it did not line up.

 

For the peasants...