What Have You Done To Your 3rd Gen Today?

Thanks!

Auto safety Steering Wheel Emblem Overlays Compatible with Toy-OTA Accessories Matte Black 1Pc https://a.co/d/dxTJqcY

 

Finally, got my lazy ass up after 4 months to install the center caps. Looks so much better with them on!

 

Damn, that is one very nice looking truck.

 

killed a crow

 

Lifted it! G/f's 22 TRD OR. ARB60091 OME Nitrochargers in back, HeadStrong's 3-Leaf Add-a-leaf, and ARB90021 Softer Ride Nitrochargers Sport w/ OME 884's up front.
Before:

After:

 

Ouch

 

I've just finished changing the Limited's grill to the Nightshade grill and changing the tail lights to the TRD Pro tail lights to get rid of the chrome on those. I think I now have the perfect balance of chrome to go with my black metallic paint. Much happier with how the truck looks now. Just a few things can really change the look of the truck.

 

Holy crow, Batman!!!

 

Can you pop everything back together or did it bust clips?

 

Insurance covers it. Broke all 3 mounting points for the headlight, hairline crack in the grill surround (with in-bedded feather for proof), repaint and clear the scratched paint on the fender, and the plastic front panel is cracked. Plus whatever else they discover.

 

Damn. Sorry, dude.

 

Dang. That’s a lot of damage. Plus a hard target to hit. I’ve peeled a bat out of my grill once but no damage.

 

$300 deductible is my only pain.....and a likely 2 1/2 month wait for the work to be done

 

Drove across the border last year and the Border Agent was laughing and told me to have a look at the grill at my next stop. Had a bat stuck in the grill. LOL

 

Does the heat not affect the camera? I'm Fort Worth and it's been up to 106 for a couple of days straight and my truck sits out in the parking lot at work with no cover... hate to invest in the cam and then it doesn't work due to extreme heat.

 

Holy C[R]OW!!

 

Today I finally installed the Yakima racks to my roof. I had gathered all the parts to do this over a year ago and just haven’t had time to do it. Anyway, it worked out perfectly- it couldn’t have fit better. I mounted a vintage Yakima basketcase inside and below/flush with the top of the bars, and it rests about 1/2” above my roof. I used older Yakima control towers, mated to the new, made for Tacoma, landing pad 24 bases. Instructions that they came with were perfect. They are far stronger than factory roof racks, far better looking in my opinion, and far less than prinsu racks. Very stoked on this-
I trimmed down long bars so there is 4” on each side with Yakima surf strap hook end caps.

 

How do you like the K&N intake? saw a couple of vids on Youtube about it and hoping to get some input before I jump off and buy one...

 

I just finished installing the same Skid Plate I bought it used off of Offerup for $100. I figured for that price WTH.
All the hardware was already installed I figured it would be a 30-40 minute job and it should have been.
But whoever installed the bolts and spacers swapped the middle and the front.
I realized this fairly quickly when I saw the gap between the middle spacers, bolts and the mounting holes.
I was a little annoyed at this point but figure it would be simple enough.
I'm guessing it had already been installed by the look of the hardware and especially the retainers.
I ended up have to cut every one of the larger retainers after spending nearly 30 minutes to get 1 off.
Moral of the story just spend the extra money and get OEM or at least new.
Wasted 3 hours of my life on some BS and nearly rage destroyed the thing in the process.

So for any future cheap asses out there short spacers in the front long spacers in the middle because not a single picture or video I could find showed this.

 

I added the spacer details on my Amazon review since none of them mentioned it there either.