What Have You Done To Your 3rd Gen Today?

Nice, did you fab that yourself, or is it a kit you bought? Doing a team event next month and I could use a good flag holder, but alas, my laziness wont allow me to make one myself.

 

OEM TRD Tailgate badge and Center Caps

 

Turned it into a road block at the Port Jervis Rail yard.

 

Diggin yours as well!

 

How many times has it had to come out?

 

It’s a pole from a long gone tent but would be easy to make with conduit or similar. I put M6-1 socket cap screws in the two holes at the front (for the factory tonneau cover or whatever) and wrapped wire around them to hold the pole up. At the bottom I slightly enlarged the center drain hole and poked the tiny tapered end of the pole through it.

The top would work the same for conduit and at the bottom you found tap a screw through a cap and put it through the drain hole before the conduit goes in.

 

Ecoological color matched bumper shells. Looks great, finally the last of the chrome is gone, and I didn’t accomplish any chrome deletion by replacing with black. I either deleted or color matched. I’m happy.

 

I like the looks of the center caps. can you provide the part # info and/or source? Thanks

 

Here ya go

https://toyotaparts.bochtoyotasouth.com/oem-parts/toyota-center-cap-trd-pt2803517002

 

I installed an ARB recovery point. Pretty straight forward but I would recommend getting someone to help lining up the internal frame bolt. It was fun by myself. My Eaton Detroit Tru Trac should be here within the week.

 

Installed the Meso Ultimate 3rd Brake Light!

 

I swapped out the plastic clutch pedal for an all metal FJ version.

 

Setup an appointment to get new wheels & tires! (Pictures in 2 weeks)

 

CLEAN

 

Did your old pedal creak? I'm curious if this would solve that problem.

 

Just rock sliders for me . Main line overland. Local shop .

 

It did around 10k miles. The disc brake grease trick got rid of it. I was never a fan of the plastic pedal and recently learned about the all metal FJ pedal. Figured it was a win for me!

 

did it myself with lots of patience haha, gonna do the rear soon was waiting in my rear bumper, just installed it today.

 

CBI High Clearance Swing out bumper with two 1.75 gal Rotopax and full 35" spare... It took every bit of energy I had, super easy if you have help but I did it alone after my friend dropped and scratched my bumper... just told him to leave. I don't recommend anyone do it alone, not only is it heavy the odd shape makes it pita to mount...I got lucky my gym days paid off for something more then girls hahahhahaa... Overall, bumper is high quality, everything fit as it should...would buy again for sure. Oh and a new sPod BantumX. Hopefully these are my last mods for a while. Dumped 30k in the truck in the last 10 days..