Diode Dynamics SS5 with switch panel help..

Could always just cut the wire and extend it and pull it through the firewall to the in cab fuse box.

 

That would be the best way to test and find the right place to hook into.

 

Alright y’all, I was tapping into the wrong ignition fuse, found the right one that was hiding behind the 80A fuse, we have success ladies and gentleman, thanks for all the help lmfao

 

Good Deal, Enjoy the Switch Panel. If you are looking for anything else from AuxBeam let me know I am a Vendor.

 

OP, how will you select the color? or did you select the color then left if at the INJ fuse?

 

So it’s all wired in but since it’s the yellow SS5s it only comes with the amber color backlight so I couldn’t tell you how it would work with the multi color, sorry

 

Got everything wired up and working like a charm, huge thanks for the help!

 

Any Pictures of the lights on with the Back Lighting?

 

Yeah, this is just now with the backlight on

 

Those are bright for just back lighting. Looks good!!!

 

Right? Thank you!

No worries! Appreciate the help!

 

Bringing this back to life real quick. Im wiring up a 7 pod SS5 cross-link light bar to my switch panel and think I can use this setup but wanted to be sure bc I have an extra wire. So let me make sure I have this correct. On my switch panel I have it broken down like this:

Switch 1: Main Beam
POS-Red wire
NEG-Black wire

Switch 2: Backlight
POS-Blue Wire
NEG-Empty

I'm left with a yellow wire coming out of the pigtail. Do I just need to cap that?