1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Using LED bulbs in a retrofit (Mini D2S)

Discussion in 'Lighting' started by avery0829, Jul 3, 2022.

  1. Jul 3, 2022 at 2:08 PM
    #1
    avery0829

    avery0829 [OP] Well-Known Member

    Joined:
    Jan 9, 2014
    Member:
    #120273
    Messages:
    108
    Gender:
    Male
    Western Washington
    Vehicle:
    2005 Tacoma DCLB Sport
    Bilstein 5100, Trail edition wheels, 265/70/17 Falkens
  2. Jul 14, 2022 at 7:57 AM
    #2
    TacoFergie

    TacoFergie Well-Known Member

    Joined:
    Dec 21, 2015
    Member:
    #172832
    Messages:
    1,302
    Gender:
    Male
    First Name:
    Chris
    Iowa
    Don't bother. You will have no were near the same light output as an HID bulb and overall cost will be similar or more. Look at the link below for 3rd gen output comparisons between PNP LED bulbs and Halogen. The 3rd gens use a halogen based projector but the end result will be similar. You'll notice that LED bulbs in a projector loose intensity over distance compared to either Halogen or HID. This is because the optics of all Halogen or HID based projectors are designed around 360 degree light output. LED's can only provide about 120 degrees of light from it's source, so LEDs on each side would only create about 240 degrees of usable light. On top of that, the amount of light outside of about 40-60 degrees of the LED chip drops dramatically. Not to mention the 3-5mm distance between the chip sets screws up the focus of the light compared to the 1.5mm or less light source from a Halogen or HID.

    https://www.tacomaworld.com/threads/3rd-gen-hid-vs-led-vs-halogen-h11-projector-headlights.589465/

    That's why PNP LEDs have so much foreground but lack distance. When looking at the Projector or even a Halogen reflector it's easy to see why distance is lost. If you look at the image below and the link below you see that practically no light is hitting the top or bottom of the reflector. The top (low beam) and bottom (high beam) are what give you distance, the sides are foreground and width. So essentially you are loosing any usable light output. Many people perceive stronger foreground and white light (5000K-6000K+) as brighter. But really the overly intense foreground light is just impairing your distance vision. Also "white" light appears brighter because there is a higher intensity of light in the UV spectrum which stresses your eyes out over long periods of time, in actuality it impairs night vision. Sorry for the long lecture, just don't want to leave you in the dark...pun intended. haha

    https://www.tacomaworld.com/threads...ctor-headlights.589465/page-268#post-26412971
    [​IMG]
     
    crashnburn80 likes this.

Products Discussed in

To Top