2” all the way around

I’ve got some questions and could use some feedback. Am I in the right direction with Fox 2.5s up front, Deaver 2” stage 1 in the rears?

current setup is 5112/5160 bilsteins leveled. Slimline front bumper and winch. KO2 275/70/17.

I’ve got a good deal on new fox 2.5s and don’t want to pass them up. I’ve got dirt king UCAs on the way along with the deavers.

will the truck ride stink bug style with the deavers? I generally have some gear but nothing over or close to the deaver stage 1 load. I want to keep the truck as level as possible.

Cheers and thanks for any feedback or recommendations

 

I can’t tell you if you are going I’m the right direction without more information about what direction you want to go. If your primary goal is to raise the front so that it is level with the rear while unloaded (never have understood why this is such a popular goal), then anything that raises the front about 1 more inch than it raises the rear will get you into the ballpark. Then when you put weight in the back, you will be squating.

 

Also depends on which Fox 2.5s you are getting (hopefully the 0-3" lift version). Not trying to be a Debbie Downer, but a "good deal" on used shocks can be much more of a headache than you hoped for. You've been warned.

Like mentioned above, need more info. Why are you going to Deavers if you are not adding weight to the back? Fox 2.5s are adjustable, so in theory you should be able to match current lift.