Shop Time w/T.W. Friends

He got the 'timer's?

 

He’s just got too many irons in the fire

He’s one of those that is wide open and always in a hurry.

He’ll tell me he isn’t in a hurry for a part then ask the next day is it ready.

 

Boss man’s neighbor ask for a wider base for his high hat on his drums. Boss had this water jet, I had to make the small piece bolted on. I like these simple jobs.

 

Why is the old one rusty?

 

It's steel

 

@XPOTRPR you ever use a Flowdrill?

https://www.flowdrill.com/usa_en/

 

But...it's on a drum...they're not typically sitting outside rusting...which that one looks as bad as a 1st gen frame!

 

I don't know where he keeps it or how old it is or why he wanted a wider base, like most of the things we make, we don't know the why

 

Why am I not surprised?

 

Only lost a dollar on my bet. One leg needed .065" shim under it. This doesn't show the shim or short leg but how it fits the spot-face
Going to toe clamp this half.

 

sure havent! I've always been intrigued though. Fusion anything is awesome.

 

oh boy. lol looks like some type of valve body?

 

That what trippy. I may have seen a video or partial video of these working and figured sumting wong.

 

Dang, I was hoping you had. I can't find speeds and feed rates for using on CNC. Only time I've used one it was on the manual mill so I could feel it. I've got 1,548 holes to do and don't really want to do them manually but also don't want to break the customers bit they supplied.....again

 

It's a multi-stage pump, final output 13,000 psi
It's for water. I want to say 10 stage but might be 8 stage.

 

This is a new one for me. Local Case dealer brought this in wanting to know if we can get the broken bolt out.




Here’s where the new part comes in, it’s a 24mm bolt stretched down to 20mm before it broke

 

Oh and he said it's probably loctited in, don't mess up the chrome

 

Good luck!

Maybe time for a new cylinder ?

 

let me ask my co-worker if he has...

Edit.. nope. Curious what you find out though.

I figured it was some sort of water valve or pump. I did some jobs years ago modifying and finishing some big brass submarine valve bodies that were similar looking.