Fitment questions

I have a 2013 trd sport and just recently in my garage installed bilstein 5100s all around with ome 887s and dirt king upc in the front and icon leaf packs in the rear. I have falken a/t 285/75r16 mounted on scs f5 16x8 4.5 backspacing waiting for lugs to come in. Am I going to have issues running this setup in regards to rubbing on the upc? I just graduated high school and basically spent all of my money from my job as a hired hand on this setup so freaking out a bit that I’ll have issues. Any wisdom is appreciated. Thanks.

 

Not to sound like a prick. But you’ll know soon enough.

Seriously though, I’ve taken part in a few projects that weren’t thought out well.
I can’t take the full credit for the screw up. I was a helper, but I should have known better.

This is the result.

And all that work to just leave it setting on jack stands and spend $1,000 more on wheels.



Lesson learned. Life goes on.

 

the unfortunate truth is that I thought this was well thought out. I’ve spent hours upon hours reading threads on TW for this very thing. There obviously is a lot of information that I had no idea my level of ignorance on.

 

You're gonna rub the cab mount pinch weld mud flaps and maybe some plastic if you offroad truck if it's a pavement princess you might be ok

 

What’s a upc?

 

you think if I get enough positive caster in my alignment I won’t rub on cab mount?

 

It’s the thing you save, so when you break aftermarket parts, you know what to order.
It has numbers and bars on it.

I’m serious, keep a list of exactly what parts you put on it.
Because you’ll never remember if you ever need to order replacement parts.
Then you have to buy a whole new set or kit.

 

Stuffed at full lock no.