What Have You Done To Your 3rd Gen Today?

Nice

welcome

 

Kicker tweeters and ditch lights

 

And done for now still need to clean it up and wire the lights up..

 

Got one Clazzio PVC seat cover in and a the back seat head rests. My fingers!!!! They look good, but wow are they a chore to get in!

 

Where’d ya get the left side switch panel you used to mount the switch pro?

 

Right here!!!!!
Or if you asking about the face plate part that’s here
https://caliraisedoffroad.com/products/2020-toyota-tacoma-switch-pro-mount

It does require some slight trimming with an Sharp knife but it’s nothing difficult takes 30 seconds

 

Installed S&B Intake with Dry Filter. Pretty simple install.

 

did mine about a year ago.......sounds wonderful!

 

Washed it



Been kind of neglecting it lately with all the tundra stuff I’ve been doing. Thought I would show it a little bit of love

 

i may have saved some lives today

 

I mean, you’re not wrong…

 

Yeah sorry I was referring to the face plate lol Hard to find good ones with just the right combo’s needed. Thanks!

 

No problem!

 

I had a busy Friday night, AJT Designs vent rings, start/stop button and ring, 4x4 ring, and door handle covers. Only a few chrome pieces left!

 

After 19 years, YES 19 YEARS. One of my Piaa LED 168 bulb died on me. Well it didnt really die it started blinking, so not working properly. They discontinued that bulb but I got a replacement Sylvania LED 168 bulbs for now for my license plate. I need to see how bright they are are night. May try and fine the Piaa ones if these dont work

 

Just did the exact same thing lol

 

Installed C4 Front bumper.

Probably install the rear next week.

 

First oil change with the Fumoto valve. I knocked the tube off trying to open the valve luckily the oil wasn't flowing yet.

While under there, I checked my ECGS bushing and Oil Seal replacement and it's still dry! whoohoo. And there is no play in the halfshaft like there was with the OEM needle bearing.


NOT RannyHill'd here.


ECGS bushing and Oil Seal holding up as expected. Still has that clean sheen from the brake cleaner following install.

 

How do you know the bushing is holding up without pulling it and inspecting it?

 

Driver observation. There is no noise, there is no leaking, and halfshaft has no play like needle bearing allowed as previously mentioned. But maybe you are on to something, maybe the bushing has exploded and it is a pile of dust circulating with the 75w90. Nobody knows.