AnotherTaco Build Thread/Reference to Remember What The Hell I Have Done to My Truck and When

Thread to organize and help me remember when and what I do with my truck.

Current:

TO BE POSTED

05/12/2022 [TO BE LISTED miles] - Rear leaf springs - New leaf spring bushings - checked brakes (all looked great)

Changed from 1" blocks and factory leaf springs to OME EL095R (per ARB support instructions "For the EL096R with an additional add-a-leaf, you will remove the 3rd and 4th leaves. These leaves should be identical. This will turn the spring into our medium, EL095R")


04/09/2022 [162,681 miles] - Tires rotated and balanced


11/22/2021 [soon to list miles] - Oil change


10/02/2021 [161,254 miles] - Tires rotated and balanced


7/15/2021 [Mystery miles] - finished custom stingray bumper build. More photos and process here (https://www.tacomaworld.com/threads/2nd-gen-front-bumper-swap-to-2-5-gen.722992/)



06/09/2021 [no clue miles] - foglights

Diode dynamics SS3 Foglights and SS3 diode dynamics 3rd gen brackets


06/04/2021 [didn't write it up /: miles] - Tires rotated and balanced


03/31/2021 [will check miles] - lifted truck 1.5 inch

Sleeve stuck in shock and needed to have whole bushing pushed out and a new sleeve sent, took a lot of time.
-Dobinson C59-314 Front Lifted Coil (405/405mm free height, 17mm wire thickness, 586LBF/IN rate)
-Dobinson

$356 GS59-221 Dobinsons Pair of Front Struts Compatible with Toyota FJ Cruiser 2006-2010 and Tacoma 4x4 2005-2018 - GS59-221

GS59-221 Twin Tube Nitrogen Gas shocks good for 0-2.5" lift
-Dobinson

$315 GS59-940 Dobinsons Pair of Rear Shocks Compatible with Toyota Tacoma 4x4 2005-2018 - GS59-940

GS59-940 Twin Tube Nitrogen Gas shocks 614mm extended, 361mm compressed, good for 0-3" lift
-Dobinson quicklift 2" rear blocks, cast iron


01/05/2021 [some miles] - Martin off-road roof rack


11/7/2020 [151,448 miles] - 4 new wildpeaks A/T3W, Certs with them, and lugs that actually fit ($594.22 with employee discount and no labor etc.)


09/26/2020 [150,000 ish miles] - Had some donuts and some fun




08/15/2020 [149,XXX miles] - ATH bed stiffeners

 

I dig the 2.5 bumper.

Are all the support brackets and stuff the same?

 

Thanks, yes everything was the same for me bc the top/middle of the bumper was plastic welded on. Only thing that didn't line up was all the fender liner holes a couple were a little bit off so zipties to the rescue.