What Have You Done To Your 2nd Gen Tacoma Today?

Installed a 1” Toytec body lift to make room for my AWD FJ cruiser transfer case and Northwest Fab crawl box. Sealed that all up last night so it’s ready to test fit in the truck now



Came up with a quick solution to take care of the rear bumper gap using some 1” aluminum spacers and longer bolts.

before


after

 

Finally able to get Rugged Trails/Baja wheels I picked up awhile back to powder coaters and picked them back up today. Previously painted cement gray and one bought off member here that was kinda beat up, had them redone in flat black. Will get them on soon as I can.

 

Cleaned up my Black Beauty and then noticed she just turned over 419,000 miles.

 

You are probably the only dude in texas with a DTF bumper.. if you consider selling that rig I’ll buy the bumper..

 

Thanks for the offer, but im taking this truck to the grave with me if at all possible lol

 

Thanks for the tip! I just did the same thing. Came out great! Now as long as stays put I'll be a happy camper! Lol!

 

Cold Air Intake Horsepower increase, up for debate, but the CIA possumpower increase is undeniable.

 

Grille and headlight change.

 

New headlight bulbs and finished wiring my power/heated mirrors.

 

Past 2 weeks, installed Joying Android HU. Got the OEM bakup camera working. Added a front camera, USB’s, software.





Front Camera View

 

Lubed the passenger side upper control arm (Total Chaos), I wasn't able to get the bolt/nut torqued fully, but it's tight. My new grease gun was also acting up but I fixed it. I'll finish the passenger side and do the drivers side at work on Monday.

I also adjusted the tie rods to get my steering wheel somewhat straight (it was way off). Now I may need to mess with it a little to get the same amount of threads on each tie rod or close to it.

I bought a new box of nitrile gloves from Harbor Freight last Sunday (they are on sale) and I can't find them.

 

Speaking from experience I hope you used white lithium or SuperLube synthetic grease and completely slacked the UCA bolt and walked it back a hair and didn't over grease and expand out your bushings.


It's a bad time if you didn't follow those steps as it turns out.

 

I did loosen the nut so the bushings didn't get blown out and I used SuperLube:

$8 Super Lube 21036 Synthetic Grease (NLGI 2), 3 oz Cartridge, Translucent White, 1 pack

https://www.amazon.com/dp/B000ILHVQ2?ref=ppx_yo2ov_dt_b_product_details

 

how do you like the headlights? Easy install?

 

oil catch can installed

 

Upgraded wheels and rims…
265/70/r17s
2016 4Runner Trail rims silver edition

 

This might be a good thread to share your (related) pics at: https://www.tacomaworld.com/threads/how-to-rear-axle-bearing-seal-replacement.734924/

 

Regear, fender trim, cab mount relocation and 35’s

 

Waited for it to get dark then drove to Burger King so I could test out my “upgraded” headlights. Marginally better.