1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bilstein 6112's lower notch on passenger side or no? and more..

Discussion in '3rd Gen. Tacomas (2016-2023)' started by TacoZmtn, Aug 12, 2022.

  1. Aug 12, 2022 at 6:30 PM
    #1
    TacoZmtn

    TacoZmtn [OP] Well-Known Member

    Joined:
    Apr 30, 2022
    Member:
    #396207
    Messages:
    270
    Gender:
    Male
    Vehicle:
    2022 TRD Off Road LB
    OTT-6112’s~5160’s rxt's~ShmellFab Sliders
    I know they recommend going lower on the passenger side. I've also seen some people run the same notch on both sides. Ive got mine on 11/9 and the ride is good except it seems like my truck leans towards the passenger side a bit while driving. It also feels like left hand turns are a lot squishier then right hand turns and the level meter on the info screen shows the truck leans more to the passenger side even with just me in it at 185lbs... Sounds kinda dumb but could that make the rear passenger side lower too? Tryin to get to the bottom of my passenger side being lower sometimes even on level surfaces... new rxt leaf pack opt 1, LB double cab with 5160's, everything stock... I would think they would almost always be level. Any info is appreciated, cheers
     

Products Discussed in

To Top