2022 TRD Trail/Pro Replica Wheels Group Buy (Closed)

Stock lugs for Steel or stock for alloy?

 

Delivered today. Trying to decide about the center caps still.

 

Finally got around to gettin' er washed. These wheels completely transformed my truck.

 

Just got em mounted

 

Anyone know the weight difference over the factory wheel trail/pro wheel

 

looks like 265/70/16? any lift on that truck? Mine is set up identically and has a 1.75"front and 2" rear lift with a leer cap.

 

Yep - 265/70/R16. I intend to go up to 265/75 but these ones still have a lot of tread left. And the 265/70s look a lot better with the offset of these wheels than they did with the stockers, so I can probably stand to stick with these tires until they wear out.
Truck is lifted ~2" in the front with 5100s and 885s and is around 1.75" in the rear with 5100s and an icon rxt leaf pack on stage 2.

 

i wouldn't change a thing, your truck looks perfect as-is!

 

Thanks man!

 

Got the wheels on...turns out my kid had stuck the center cap stickers on the shelf when they first arrived. Now I need to order a set of backup center caps for when the guy at the tire shop breaks these.

 

Has anyone put these, in 17's, on a first gen?

 

@Johnny77 looking over my wheels before i go to have tires mounted and balanaced but i wanted to run this by you before i went to my appointment. i saw that you all have corrected the hub clearance but do you know what accuracy the machining was done to provide that clearance? The most common way that these are balance is via the hub on a taper balancing machine and if that taper hits the "corrected" clearance portion before the hub that it rides on the truck, i think there could be discrepancies between wheel balance on the machine vs the truck.

looking for assurance that it was done with a certain degree of accuracy

 

Thanks for posting your question. I understand your concern, but we have had zero issues with balancing after the corrections were made. We test fit every set before shipping them out. We also mount and balance in-house every day. Not only is the wheel put on the balancer with a tapered cone, but it is also clamped on with a vibration solution plate and a crank handle, which completely secures the wheel in place for balancing. Just as it would be secured on the hub when the lugs are torqued down. There should be no issues with balancing the wheels.

-Dustin

 

thanks Dustin i feel better now, my concern was because im riding on stud mounted rims currently and i bought these rims because i wanted to get rid of the vibrations!

 

No worries!

We take care of our customers as well, so in the event there was a problem, we would do our very best to find a solution for ya.

Feel free to shoot me a message any time.

-Dustin

 

Wheels look great but word of warning

These lugs suggested in the post, one came without any threads on the inside. ( i seem to be the lucky guy that gets these types of issues)

$35 Set of 24 Veritek 12x1.5mm 1.87" 47mm Length 13/16 Hex OEM Factory Mag Washer Style Black Lug Nuts for Toyota Tacoma 4 Runner FJ Cruiser SR5 Pre-Runner TRD Off-Road Limited OEM Replacement

https://www.amazon.com/dp/B07N373N6M

 

ive contacted them but im in a rush since ill be driving to florida for vacation in a week ( i doubt they will move that fast) i bought a set of wheel locks and those should deliver sooner than ill get a response back from the seller.

 

Got mine mounted! Black lugs and the land cruiser caps

 

@Johnny77 Did you ever get one to test? I was going to order these if you think they fit.

https://www.toyotapartsdeal.com/oem/toyota~btn-ctr-cap-tun-trd~pt280-34190-02.html