Wont accelerate past 10mph

My 2009 Toyota Tacoma will not accept late past 10mph once I get it to that the abs beeps and it like hits brakes for me kinda and I can’t accerlate anymore

 

Scan it for codes. Usually a wheel speed sensor or the ring that the sensor reads off of. The braking is the anti lock brakes kicking in because the vehicle thinks that it is detecting wheel slippage because it is receiving an abnormal reading from one of the wheel speed sensors.

 

As a workaround/test press and hold the VSC Traction Control off button for a few seconds with the vehicle stationary until the VSC and Trac Off lights turn on and you should be able to drive normally.

 

I did that. It let me accerlate but soon as I let off gas the brakes kicked in and my steering wheel locked kinda

 

Did you hold the button in until both these lights came on?

 

Yes I did

 

That's weird that it would be trying to apply the brakes with the system disabled unless something else is going on.

 

I’m thinking the speed sensor.

 

Well there’s 4 of them so scan for codes to see which wheel.

 

There’s no light on. No codes show up. What other ways to know which one

 

Did someone put it in 4 wheel low?

 

I see in your profile you have a 3 in lift and 33 in tires, this problem didn't happen to start just after that was done did it?

 

No 4wd don’t work lol front diff left chat

 

I did all that 2 years ago

 

You need to look at ABS/VSC data with a scan tool then and see which sensor(s) aren't reading properly.

 

Wouldn't explain the warning light but is the broken front diff still in the vehicle? Any chance something is binding up at the front axles?

When you say the steering felt locked it sounds like something mechanical in the drivetrain

 

It only feels locked when abs kicks in and hits breaks. Front diff been broke for a year or so judt ain’t fixed it lol keeps me off the powerline mud

 

Sounds good if I drive it long enough like over hour a light eventually comes on and off I’ll drive and scan it