What Have You Done To Your 3rd Gen Today?

Retire retire or Navy retire?

 

I didn't have any issues with fit or with function, but mine's probably not OEM either.

 

Retire completely. No longer in Navy.

 

Picked up and installed a OEM roof rack for $100.

 

Did a tire rotation and spacer check. No movement in the spacer nuts since install (5k miles).

 

Added the emblem overlay but bummed I didn’t get it centered quite right. Oh well, still looks better than the chrome.

 

here ya go!

 

Got a link for this overlay? TIA

 

Nice!

 

Got it from here. https://instagram.com/c_mento_taco_808?igshid=YmMyMTA2M2Y=

 

I'm sure this has been answered elsewhere, but I've seen it twice now and I'm curious.....Which TRD center cap fits on the stock 16 in. wheels? If you have the part number that would be dope

 

1.5 inch wheel spacers.

 

New tires and wheels, spc ucas, bilstein b8 8112 front coilovers and bilstein 5160 rear shocks. Got some icon rxt leaf packs to install but my back has had it after the last few days.

 

-greased front driveshaft
-changed front diff and back diff fluid (and took the opportunity to put Lexus plugs on the front diff)
-changed T-case fluid
-changed tranny fluid

I split it up over a few weeks on the 2000, but figured since I had to take the skids off on the ‘19, I may as well do everything in one go - took a longgg time, but should be good for awhile!

 

How many miles did u run it before changing those fluids?

 

I got it used at 39,000, changed at 45,000 and wish I had done it first thing as no way PO changed it given the color of the crap coming out

so I’ll say “before 45,000” is my suggestion

 

Nice looking truck. And sitting on a nice looking piece of property too.

 

I have the stock 265 65 17 and used this part number PT2803517002

 

Modified my left side switch panel for my off-road lights. But didn't like how the switches weren't the same between the different lights (fogs, light bar, and ditch). I got some scrap cut-off from a local off-road shop (thanks @Dirt King Fab), did some test fitting and drilling and painting and voila! I'm actually surprised at how good it looks, that's not my MO.