6112/5160 with icon 1.5 add a leaf

6/5

 

Mine at what I am assuming is max settings since I had a shop do it. Rear is Icon AAL and have Icon UCAs in front.

 

Loving that wheel color on your white taco. Considered going gold or copper on my black if SCS would get some inventory back in stock.

 

Thank you bro appreciate it. Hell Yeah do it

 

the stock OR suspension is more floaty than aftermarket? i feel like its pretty bumpy but then again ive never driven anything modded. Anyone know of an aftermarket setup thats smooth both on and offroad?

 

I went from 5100s to 6112s and 5160s
I personally like the ride and handling better now. I have Icon add a leafs in the rear. I did not need to do a diff drop or
Front bushing , no vibration or clicking
at all. Torres are 275-70-17.

 

Looks good

 

What settings are you on in front?

 

I will get to setting for you next week , AZ Toy Pros did the install.

 

I've got the 6112/5160 set up. I swapped out the Leaf Pack instead of a AAL. I felt that after the break in, the AAL might sag a little because ive seen it on so many other rigs.

Buy once, cry once.

UCA's are SPC.

 

What shock notch setting and what leaf pack? Good looking truck!

 

Appreciate it.

#6/#5

Deavers

 

Wheel spacers? What settings did you go with on the SPC’s? Truck looks great man.

 

Thank you my good sir. This is actually a rather old picture when I first did the lift. Ive added quite a bit since.

Nope, no spacers. And for the life of me I completely forgot what settings its sitting on the SPCs. What I can confirm is that im on 285s and there is plenty of clearance between the SPC and tire. Also I did not have to do any cutting. The only rubbing I had was against the mud flap. Once I removed the flap, everything was rub free.

Cheers!

 

They set the fronts at slots 5 and 6 with 1/4” spacers on both sides, the front is a tad higher than the rear . I also have SPC
Upper control arms.

 

Which Deaver leafs did you use? U402 Stage 1? or J66? Thanks!