Best OEM Leaf Spring replacement

So it looks like my (2001 dbl cab 4x4 off road package) rear drivers side leaf spring is cracked and rusted through. I am looking for an as close to OEM replacement for it. I dont want to lift the truck, I would like to keep the height stock. Should I replace the other leaf spring at the same time as well? Thanks

 

2001 - 2004 Toyota Tacoma Leaf Springs | General Spring (generalspringkc.com)

 

Definitely replace both at the same time. Can't help you with a brand recommendation.

 

My buddy has a set of 3rd gen leafs, is it possible to use those?

 

Other things to consider while you're looking at the springs- You'll for sure need new u bolts (they are a single use item), also check your shackles. Depending on the rust, they may or may not be reusable. Start soaking the hangers, u bolts, and shackle bolts in PB Blaster or a penetrating lubricant of your choice (not wd-40). There is a high likely hood that you'll need to cut the forward hanger bolt- either way get new ones. Also check your bump stops. I think General Springs also sells a bump stop.

No- they are completely different.

 

Different frame

 

Use, yes. Direct replacement, no.

and will make them fit...

 

General Springs, it's asked a lot here.

And no, 2nd and 3rd Gen Tacoma's are completely different from 1st Gen frames.

 

Nothing a plasma, welder, and a little of wishful thinking can make something from nothing

 

Plasma cutter makes it all too easy

 

That's the fun part. Swiss cheese

 

Funny too cause my extra drag tips and electrodes arrived yesterday; now to cut all the things