Show your 285/75/16 and 285/70/17

What's your offset on your Ray 10? I'm waiting to do my CMC and suspension before pulling on the same tires as yours. I have the Ray 10's as well w/ -10 offset. Sweet ride!

 

Thank you! these are the -38 offset. If I get the chance I'll probably go to -10ish.

 

BFG KO2 A/T 285/75/16 on stock 2021 TRD Pro wheels.

Wescott Designs collar lift and Deavers Stage 3 springs.

 

Toyo AT3 285/75/16 on 3/2 lift Bils 6112/5160 with icon Delta joint UCA and icon add a leaf. Rides Great

 

285/75/r16

 

285/70/17 Toyo open country AT3 SEMA wheels and Bilstein on the 4 the setting.

 

What lift ya runnin

 

Just got my 285’s on last week. Falken Wildpeak at3w 285/70/17, Method 305 double black 0 offset, Bilstein 6112/5160 set at 6/5, AAL, SPC UCA’s

I’m 17yr old kid kinda happy with it.

 

Been a week on the new 285s and I rubbed a few more times on the pass. side mud guard. It was such a slight rub so I drilled a new hole in the bottom of the mud guard and moved it back about a 1/2 inch. Problem solved, no more rubbing so I went ahead and did the driver's side. So for some wanting to keep the factory guards, take them off and the one hole on the bottom slightly lengthen the hole. It allows for some adjustment. We I had my truck lifted almost 4 years ago the alignment was done to fit 285s at the time but like a dummy I went 265s. No CMC needed on the factory 4Runner wheels, so happy to be on some 285s, love the look and ride is even better. Now just waiting to do the speedometer calibration but most importantly fixing the shift points and computer for the mileage.

 

yeah I love the ride though it is a bit stiff at 6/5 hoping it softens a bit but may see about dropping down one notch. I rub a tiny bit at full turn in some situations but I haven’t done an alignment yet, and I’m betting with the SPC UCA’s they can dial it in fine.

when you calibrate for shift points where are you going for that? Is this just the OV Tune or whatever? I haven’t done a speedo calibration either not sure where to get it done

 

Waiting on my tuner who did my kdmax pro xt tune. It's an inline calibration plug and play from rough country same kit as hypertech as it fixes the shift points and the mpg settings, makes it accurate. The ride is the same on all of the settings. My son's Taco is on the fifth perch and rides identical to mine.

 

These are 285/75/16s that I just replaced with a larger setup. Good size just wanted to go a little bigger



These are 285/75/17s that I replaced the 16s with.

 

Mickey Thompson Baja Boss 285/70/17

 

how do you like the 6112/5160 set up? thinking about getting that set up. i usually go off roading on the weekends and more road driving than anything

 

Sounds like we off-road about the same more on road than off
I really like set up so far
I also added Icon UCAs that seem to help and I also just had ECGS bushing installed
So far so good. I really have enjoyed these upgrades

 

thanks for the feedback!

 

How noticeable was the ride quality change when going with 285's?

Thinking about getting an elka 2.0 suspension, and ome leaf for a 3/2 lift and going w/ 285's.

 

This looks perfect! Any rubbing? What mudflaps do you have on the rear? Thanks!

 

What size are you running exactly? I'm looking at getting the Work S1HC as well! Yours looks perfect!

 

285/70R17