Rear Shock Question

Does someone know where I can buy a plate or a kit where the rear shock mount can be a little higher, thank you

 

https://www.ruffstuffspecialties.co...MIiIasusak-gIVrRNMCh3fUgFaEAQYASABEgIdl_D_BwE

 

You’d probably have to do the math and make sure the new location’s geometry works with whatever shocks you have or plan to run. Otherwise you’re eliminating bump travel unless you’ve compensated by relocating the top mount as well.

 

The strut is stretched out as far as possible cus of the leafs, I want about 1”-1.5” more up for the strut can dampen

 

i was thinking of cutting off the female end of the bracket and making an L shape and moving it up

 

This is because those King shocks are meant as OEM replacements.

I had shared this information with you prior to your purchase; unless you go custom King, or go with a different brand, off the shelf King rear shocks are too short for any real lift.

 

What if you got a u bolt flip kit?

 

yeah thts another option, you recommend one?

 

Honestly nope. I’d just throw a couple bags of sand in the back of the bed.

 

That's not the answer he's looking for.... LOL. He don't like being TOLD

 

ima just remove another leaf and relocate the shock mount

 

Point being, you're given factual information and brush it off many times over.

It's comical at this point really.

Oh and, those Kings are short.

 

So these shocks? Huh, took 3 minutes to find the 3 sizes. OEM, Ext 1 and Ext 2.

 

https://www.4crawler.com/4x4/4R_suspension-III.shtml The flipped u bolt is what this guy did if you want to check it out.