Blower not working

Hey all,

I know I may be beating a dead horse here but I’ve searched and replaced all the “known culprits”.

Replaced the resistor, blower, connector to both and checked all fuses.

is it possible there’s a spot in the wiring that’s burnt?

Should I just replace the entire harness going from the climate control panel to the resistor and blower?

 

Go to the blower connector with a test light or meter key on and switch on high and see if your missing power or ground, based on your findings we can help you troubleshoot further.

 

Won’t be able to help outside of these threads, maybe there’s something there that can help. Good luck.
https://www.tacomaworld.com/threads/ac-not-working.779290/#post-27862415

https://www.tacomaworld.com/threads/blower-motor-or-fuse.778358/#post-27827477