Joying 11.6 Android Wiring for Kicker Key and Kicker Hideaway

Hey guys! Hope all of you are doing well! I am having to replace my Car Trim Home PX6 because my body shop cracked the screen when they replaced my dash. I ended up getting the 11.6 double din from Joying.

The questions that I have relate to how to tie into the Toyota harness that Joying sent with both my Kicker Key amp and my Kicker Hideaway sub.

The diagram shows amp cont. in the orange black wire which I’m assuming I’d tie in my blue turn on wires from both the amp and sub to but it looks like there are a couple of orange black wires going into a fuse and coming back out toward a female plug.

There is also a blue wire going into the radio plug which I’m assuming is the power antenna wire or ant cont.

I’m really confused as to which wire I should tie into to turn on the amp and sub when I turn the ignition.

I’d appreciate any help you all could provide.

 

Hey, Did you ever get this unit installed? I was wanting to ask if the Air Conditioner controls on the HU worked for you or not.

 

I would not expect AC controls to work, as they are physical dials so the radio can’t turn them

 

Even on the 2021 - 2022 where all the dials are digital? It doesn't matter as much to me as getting the back-up cam working.

I am guessing there is a way to turn off the A/C icon on the Joying, hopefully.

I did notice that there are two extra plugs "wide ones" in the dash, that don't have a female connecter on the harness. Then there is also a small blue plug.

 

It might work with those controls. Time will tell!