Flashing 4 lo

My 2016 was put into 4lo instead of 2 hi and is now flashing 4lo and won’t come out of that gear

 

Patiently in neutral, switch to 4hi, slowly and into 2hi back and forth, 5 second intervals.

 

Put it in neutral, while on level ground, then change it from 4Lo to 4Hi, to 2Hi. Wait a few seconds and then put it into drive and drive a few feet. That should kick it out of 4Lo.

 

Going in and out of 4Lo you should be in neutral. Between 2Hi and 4Hi is drive.

 

I have tried the neutral switching to 4hi with no results. Driving forward a few feet back a few feet. I can hear stuff moving in actuator while having a friend move switch between 4lo and 4 hi

 

Hey, thanks for that. But I wanted the code to fight Bald Bull.

 

Is this a manual tranny, or auto?

 

Was there a recent water crossing involved? Might check the actuator.

 

0073735963 takes you straight to Tyson.

 

Auto and it hasn’t been in any water recently

 

you've tried turning the knob right? you have to be in neutral and press the knob down before turning. you might have to roll forward a bit for it to engage. if it is flashing 4lo that means it hasn't engaged 4lo yet.