Anyone Around Salt Lake City Interested in a Bolt-In FZJ80 Rear End with E-Locker and 4.10's?

Potentially selling a freshly rebuilt FZJ80 (Land Cruiser) 9.5" full float rear axle, 4.10 gears, factory e-locker, new locker actuator, new wheel bearings, new brakes, Spidertrax wheel spacers, new everything. I built it to last, probably dropped 2.5k just on parts. This is ready to bolt into a 2nd gen Tacoma, only issue you might run into is shock mounts. I have custom shock mounts so you'll probably have to fab something (the BAMF shock relocation towers should work just FYI).

I'm thinking $2200. Any takers?

edit: the diff is slightly offset but this is not an issue for these trucks. Because the offset is orthogonal to the lift height, you calculate the projected angle and equivalent lift...which is something like 1.5". Been a while since I did the math but I ran this 80mph on the freeway and never experienced vibrations.