Slip light ON and truck shakes randomly between 10-35 mph.

Ive read the

https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

Slip light ON and truck shakes randomly between 10-35 mph. like 1-4 times on a normal drive. The problem I have is the slip light just came back on. It doesn't show up on a scan? And I feel like its something electric or driveshaft related? But it isn't consistent.

When it had a 3 inch spacer lift it did it a lot more.

I replaced everything with a real lift (5100) and new springs everything. It does it randomly still but its a lot less.

Just wanted to get your guys thoughts.

 

Did you do the calibration?

 

After the lift? Yes. But it was on when I got the truck...

 

Is the steering wheel straight when your driving straight?

If it is your gona have to see what code(s) are in the ABS module and go from there.

 

Sounds like a cracked tone ring

 

What is that?!?

 

Awww sorry no I replaced the CV boots and wheel hubs recently. The tone ring was in good shape on both sides of the front.

 

There's tone rings at the rear axle. Are you sure you don't have abs codes? A normal generic OBD2 scan won't pick any up, need a scanner that's ABS/Trac capable

 

I believe the light is on?

 

Maybe a wheel speed sensor?

 

The tone ring and the sensor work closely together to report wheel speed to the control unit. Really need codes or graphing of speed sensor signals to go further with diagnosis

 

whats the best way to check for a broken tone ring without pulling the axel?

 

Watch wheel speed sensor on a scan tool while driving