Leads on decent TRD Beadlock wheel clones?

So after some figurin' on my abacus, I've come to the conclusion that market price for the OG trd beadlock wheels has FAR outpaced their true value. Sets going for 3-5k is insane IMO. Granted, I understand that this is how supply and demand works especially with a discontinued product, but I can't justify spending that much on rims alone.
So, does anyone know of any look alike substitutes or even reputable, passable, knock offs that I could throw a TRD centercap on and call it a day? I 'ppreciate ya.

Edit: Maybe a china direct risky group buy? lol
https://bestya.en.made-in-china.com...a-Tacoma-Hilux-Fj-L-Cruiser-Tundra-RAV-4.html

Edit 2: Seems like FN wheels has a secret menu. If you email them directly Dustin will send you pics of the overlander wheels, their TRD Beadlock knockoffs. I'm getting a price on 5 bronze ones and will report back.

Edit 3: the price for 5 in bronze is $1.5k shipped to my door. Might have to hop on that. Seems a lot fairer and they'll be brand new

 

https://www.tacomaworld.com/threads/fn-overlander-wheels-spec-a-and-b-show-em-if-you-got-em.459586/

 

Yeah doesn't look like those are available on FN's website anymore:
https://www.fnwheels.com/store/

 

Asking prices are very different then sold prices and with tires mounted isn't true value.

Gotta pay to look the part

Do you know that the OEM TRD Beadlock center caps are NLA/Obsolete as well? eBay prices are well over $50/e brand new when found and used caps go for similar stupid cash as well.

 

Trust me, I keep an eye on my local FB market and Craigslist. The rims with no tires are selling for anywhere from 2.5k to 3k+. Selling.
Also knock off center caps are easy to source on the internet, that's not the issue.

 

Where is your "local"?

 

NYC/Philly/Baltimore area

 

Dustin's price for 5 in bronze is $1.5k shipped to my door. Might have to hop on that. Seems a lot fairer and they'll be brand new.

 

Bronze seems to be the less common colour, and for five shipped, that's a deal!
Make sure to get the correct TRD lugs and locks PTR2735100 or aftermarket "tuner" style with the thin "socket".

 

There is a set with tires on FB marketplace in Philly for $2k.

 

I saw them. Messaged the guy and he was a total dick. I asked what the price would be without tires because I only wanted the rim and he went off on how he's not spending money to have them unmounted, entitled people, blah blah blah. lol.
They also look beat to hell

 

Wow, some people. Best thing is to have a Toyota dealership do a nation wide search as I bet there is a set sitting somewhere in someone's inventory.

 

A few TW members have done that and bout more than a truck's worth of rims months ago.

 

Been there, tried that. Apparently there's nothing left in the North American system. There was literally one set in Canada, but it was going to be a butt ton between the import fees and shipping fees. Not worth it. Plus by this point they're probably gone.

 

Additional specs provided below. Anyone know what stock offset is? I have a 2in lift and am trying to run 33s without rubbing. Already did a cmc for 285/75/16s but would like to go to a 33 skinny

FN Wheels Overlander
Diameter: 17"
Width: 8.5"
Offset: -6mm
Backspacing: 4.5"
Bolt pattern (PCD): 6X139.7mm (6x5.5")
Weight: 27lbs (approximately for Spec A) / 29lbs (approximately for Spec B)
Load rating: 955KG (2,100lbs +)
Certification: JWL-T, VIA, SAE J-2530, DOT approved
Toyota specifics: 106mm hub centric for Toyota hubs and the lug/stud openings are machined to accept extended thread (E-T) lug nuts for maximum stud engagement on short Toyota OEM wheel studs.
Additional notes: Knurled bead seats to enhance tire bead retention when tire pressure is lowered (i.e. during rock crawling, offroading, etc.).

 

Damn, maybe its time to part with mine.

 

But you would save 25% on the dollar exchange.

 

https://www.tacomaworld.com/threads...-wheels-before-they-were-discontinued.784295/