Lift for 1st gen taco

I have a 99 tacoma, i recently put a rough country 2.5 inch lift/level kit on it and kind of like it. It was the cheapest option so I went for it. I just put on a 80 pound plate bumper and am planning on putting on a 9500 lb winch. I also have a 2 inch block in the rear to level it out. My new bumper weighs my front end down about an inch. I think the winch will take it down another inch. I am planning on putting 33s under it but I don’t know if they will fit anymore. My first thought was to put a 2 inch puck lift to raise the front and level it out. I’m looking into a new lift now. Does anyone have an idea what I should do. I’m liking the bilstein 5100s but I don’t want to have the same problem. There are also the OME 2881s and 2883s. I don’t know how difficult a dif drop is though. Once again, the total weight of my bumper+winch is roughly 150 pounds. Thanks

 

do a search here on TW. There are many, many posts covering this exact topic. They should give you a good idea which direction you want to go.