Too much lift 883s and 5100s on 09 reg cab

hi guys need help.i measured pre install 20 1/2.after 883s and billies install my mechanic sent me the pic the fronts waay high.i asked him if he set the billies to 0 he said yes even double checked they are set to 0.asked him to measure 25. ended getting 4 1/2 lift.pls let me know
if you have an idea what might have been done wrong. thank you in advance

 

Just a guess, lower spring perches installed upside down.

Pics would help.

 

Are you a standard cab 4x4? And pics would help of the suspension. Where the springs clearly marked 883x?

 

Dude, this I gotta see

 

My 883's netted me just UNDER an inch of lift with 5100's on the 0 clip. I get that i'm an AC but something isn't right.

 

Bottom seat is upside down yo

 

I thought the numbers were
double cab v6 4.0L
bilstein 5100 set to 0
AAL = 1.5-2" lift rear
OME 883x = ~2" lift front

might be slight difference on lighter reg cab with lighter 2.7L i4 engine but still

sound like something with mod potential

 

thank you guys.i will check tomorrow if the bottom seat is upside down and yes I've a reg cab.ill try to figure out how to upload pics ill keep you guys updated.again thank you

 

No i think the AC and DC get like 1.25" according to the charts... but my real life experience was .75-1" of lift for the 4.0.

 

hi guys thank you for helping me out. yep he installed the bottom perch upside down. i ended getting an inch and half lift after he corrected it.again thank you
very much guys.

 

now just waitin on dustin from FN to update his website so i can order the wheels

 

This is the funniest thing I’ve seen today.

how do you like the setup and has it settled? I’m looking to do the same but was hoping for more like 1.75 in the front.