VSC/ABS does not recognize shift lever P

Hi, I have a problem with my 2020 Tacoma TRD pro.
I cannot calibrate the VSC because the ECU does not recognize the shift lever position P.
If I look at the live data in the transmission ECU then the shifter positions are correct.

Attached are 2 images of the live data from the VSC ECU.

I hope somebody can help me

 

Im Video ist zu sehen, dass der Lernvorgang nicht richtig funktioniert, weil die Schlupfkontrollleuchte nicht blinkt

 

I don't have an auto but there's a park/ neutral switch on the passenger side of the transmission. I'd start there and also confirm it shifts fully into park.

 

I'll check the P/N switch soon

 

I just took a closer look at my engine ECU and looked up the part number on the internet. I was told that the part number does not match my vehicle at all, the part was only installed up to 2018 and my Tacoma is built in 2020.

Maybe that's the mistake?

 

Just to be clear.
The TCM aka: Transmission ECU shows the correct gear.
The main ECU does not?

 

Yes, the correct gear is displayed in the engine ECU (ECM) / transmission ECU.
Only in the VSC/ABS ECU you can't see the gear

 

You have no other trouble codes present, correct?

 

No other DTC's

 

especially if the vehicle was flood damaged.

 

that's the wrong ECU for your truck. for 2016-2017 trucks. those didn't have the TSS system.

 

Park/Neutral switch is OK. I measured it and the live data in the transmission ECU are also ok

 

what is the correct part number

 

And what exactly is TSS, I can't think of a German translation right now

 

"Toyota Safety Sense" - Adaptive cruise control, etc.

 

Toyota Safety Sense

 

i'm not sure, there are so many different ones. Don't want to give you the wrong one.