1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Carhartt Seat Saver Seat Covers on my 2nd gen (Review) Mobil 1 75W-90 - Good deal !! Waterproof Solar Battery Tender/Trickle Charger? P0430 Code: Catalyst System Efficiency Below Threshold (Bank 2) Hellwig helper springs 550EZ help!!!!!!! Boom there goes 4wd, thanks Toyota for frame swap problems

2nd Gen Tacoma 4.6 V8 1UR-FE and GX powertrain Swap

Discussion in '2nd Gen. Tacomas (2005-2015)' started by dpanibratets, May 22, 2022.

Page 13 of 59
  1. Dec 5, 2022 at 2:49 PM
    #241
    dpanibratets

    #241
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    I test fit the steering column bracket today and welded it in once I was sure that it cleared everything.

    20221205_132420.jpg 20221205_132359.jpg 20221205_132428.jpg
     
    dpanibratets, Dec 5, 2022
    #241
    not_nick, SpeedwayTaco160, TnShooter and 8 others like this.
  2. Dec 5, 2022 at 5:38 PM
    #242
    Torspd

    #242
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,473
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Damn. I can't even tell where the new welds are versus the OEM.
     
    Torspd, Dec 5, 2022
    #242
    Backdoc, TnShooter, SR-71A and 1 other person like this.
  3. Dec 8, 2022 at 1:34 PM
    #243
    dpanibratets

    #243
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    I took the steering wheel lock off today. They are pretty clever at the factory, they use torque off heads on the bolts that hold the lock to the steering column. Luckily the column/lock housing is made of aluminum so I was able to weld on some 13mm nuts on to the torque off bolts with worrying about welding to the housing. They came right out and so did the lock. I need to steer the truck to wheel it out and take off the bed. Also I had to drill a new bolt pattern to use the lexus steering column boot. The diameter of the shafts is different, no big deal. The column is fully bolted in and the truck steers now. I put in the beige steering wheel for now because I don't want to accidentally damage my black leather with no wood grain (which is pretty hard to find). 20221208_131922.jpg 20221208_131916.jpg 20221208_131804.jpg 20221208_131847.jpg 20221208_131753.jpg
     
    Last edited: Dec 8, 2022
    dpanibratets, Dec 8, 2022
    #243
    not_nick, Torspd, Ricardo13x and 16 others like this.
  4. Dec 9, 2022 at 6:43 AM
    #244
    NmapFE

    #244
    NmapFE Well-Known Member

    Joined:
    Apr 1, 2022
    Member:
    #393981
    Messages:
    543
    Gender:
    Male
    Vehicle:
    2014 DCLB 4x4 Limited. 6112’s/5125, KYB Top Hats, SPC UCA’s, Icon RXT leaf pack,
    2014 DCLB 4x4 Limited. 6112’s/5125, KYB Top Hats, SPC UCA’s, Icon RXT leaf pack
    :popcorn:
     
    NmapFE, Dec 9, 2022
    #244
    dpanibratets[OP] likes this.
  5. Dec 10, 2022 at 9:23 PM
    #245
    dpanibratets

    #245
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    Truck is reparked and ready for rear section restoring/reinforcement.
    20221210_195552.jpg
     
    Last edited: Dec 11, 2022
    dpanibratets, Dec 10, 2022
    #245
    not_nick, Tatts521, CowboyTaco and 9 others like this.
  6. Dec 10, 2022 at 9:57 PM
    #246
    TacoBeng8

    #246
    TacoBeng8 Well-Known Member

    Joined:
    Oct 7, 2015
    Member:
    #166062
    Messages:
    89
    Gender:
    Male
    Vehicle:
    same as yours
    I found this thread by chance. Truly refreshing and took the time to read it all. OP is getting it done. We’ve all thought about this very swap!

    What is your plan for the shifter? Will it align or will you just cut as needed and use the GX’s?

    Keep it up! You’re a source of motivation.
     
    TacoBeng8, Dec 10, 2022
    #246
    SpeedwayTaco160, MSN88longbed, dpanibratets[OP] and 1 other person like this.
  7. Dec 10, 2022 at 10:36 PM
    #247
    dpanibratets

    #247
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    Thank you for your support. I will try to line up the shifter with the oem plastic cover. If that doesn't work, I will probably tig weld a cover up.
     
    Last edited: Dec 11, 2022
    dpanibratets, Dec 10, 2022
    #247
    MSN88longbed, TnShooter and Ricardo13x like this.
  8. Dec 10, 2022 at 10:43 PM
    #248
    Ricardo13x

    #248
    Ricardo13x YT: @UrbanOpsOffRoad IG: @urban.ops.offroad

    Joined:
    Feb 9, 2020
    Member:
    #318785
    Messages:
    2,973
    Gender:
    Male
    Upland, CA.
    Vehicle:
    05 OR DCSB ProRunner(4x4 conv.), Chevy 63”s, NWF EcoCrawler, 35”s
    Random stuff. Oh! and converted to non ADD 4x4.
    Dude I love this build!!
     
    Ricardo13x, Dec 10, 2022
    #248
    TnShooter and dpanibratets[OP] like this.
  9. Dec 12, 2022 at 10:38 AM
    #249
    dpanibratets

    #249
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    DMZ Fabrication box in kit rocks!

    20221211_215541.jpg
     
    dpanibratets, Dec 12, 2022
    #249
    not_nick, CowboyTaco, DesertRatliff and 7 others like this.
  10. Dec 12, 2022 at 10:55 AM
    #250
    MA_TACO

    #250
    MA_TACO Well-Known Member

    Joined:
    Jan 28, 2018
    Member:
    #242689
    Messages:
    671
    Gender:
    Male
    Wesley Chapel, FL
    The driver's side bolt can be removed without cutting or lifting the engine. Just have to loosen all 4 Ac compressor mounting bolts(1GR-FE) then remove all except the rear upper one so that the compressor can be tilted back just enough to get the bolt out. Not hard to do. People wonder why Toyota slid those bolts in from the top and it's for safety reasons. If inserted from the bottom and for some reason that bolt breaks or loosens it will fall out the bottom and your steering will be compromised. Awesome build though!
     
    Last edited: Dec 19, 2022
    MA_TACO, Dec 12, 2022
    #250
    2big4arunner and saf023 like this.
  11. Dec 12, 2022 at 11:14 AM
    #251
    Torspd

    #251
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,473
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Did those in July/August. Should have waited until now. Lol. Bent over in that heat was a killer. You're in much better weather.
     
    Torspd, Dec 12, 2022
    #251
    TodayWasTHeDaY, dpanibratets[QUOTED][OP], stickyTaco and 1 other person like this.
  12. Dec 12, 2022 at 11:17 AM
    #252
    nudavinci64

    #252
    nudavinci64 Robert @ Holy Horsepower

    Joined:
    Nov 14, 2013
    Member:
    #116533
    Messages:
    10,146
    Gender:
    Male
    First Name:
    Robert
    San Mateo/Cayucos, CA
    Vehicle:
    13 S/C TRD OffRoad 4x4
    Boosted Money Pit....
    I need to get around to this as well.
     
    nudavinci64, Dec 12, 2022
    #252
    dpanibratets[OP] likes this.
  13. Dec 12, 2022 at 11:18 AM
    #253
    Gearheadesw

    #253
    Gearheadesw must modify

    Joined:
    Apr 2, 2012
    Member:
    #76139
    Messages:
    5,089
    Gender:
    Male
    Davenport Fl
    Vehicle:
    1 truck 1 car 1 motorcycle
    Nice build, I had a 2nd gen Tundra with the 4.6, it’s a great engine, Will be strong in a Tacoma. Nice work.
     
    Gearheadesw, Dec 12, 2022
    #253
    saf023 and dpanibratets[OP] like this.
  14. Dec 12, 2022 at 11:19 AM
    #254
    Torspd

    #254
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,473
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Due to my brake lines, on the driver side, there were some modifications requires for those plates. A few others needed slight notching or cutting. Nothing major. Otherwise, a great add in.
     
    Torspd, Dec 12, 2022
    #254
    dpanibratets[OP] likes this.
  15. Dec 12, 2022 at 11:22 AM
    #255
    Torspd

    #255
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,473
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    As the cross member, I also added in some cardboard CAD plates. Since that section was left out. These might be a worthy addition for you two @nudavinci64 and @dpanibratets

    20220713_191527.jpg



    20220713_191556.jpg
     
    Last edited: Dec 12, 2022
    Torspd, Dec 12, 2022
    #255
    Tatts521, essjay, SR-71A and 1 other person like this.
  16. Dec 12, 2022 at 11:25 AM
    #256
    nudavinci64

    #256
    nudavinci64 Robert @ Holy Horsepower

    Joined:
    Nov 14, 2013
    Member:
    #116533
    Messages:
    10,146
    Gender:
    Male
    First Name:
    Robert
    San Mateo/Cayucos, CA
    Vehicle:
    13 S/C TRD OffRoad 4x4
    Boosted Money Pit....
    Yah def makes sense it will need a full bracing job.
     
    nudavinci64, Dec 12, 2022
    #256
  17. Dec 12, 2022 at 11:38 AM
    #257
    dpanibratets

    #257
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    I will definitely do that!
     
    dpanibratets, Dec 12, 2022
    #257
    saf023 likes this.
  18. Dec 12, 2022 at 11:53 AM
    #258
    TodayWasTHeDaY

    #258
    TodayWasTHeDaY Hoser

    Joined:
    Jul 10, 2017
    Member:
    #223673
    Messages:
    2,062
    Gender:
    Male
    First Name:
    Russ
    Calgary
    Vehicle:
    2015 DCSB SC M/T TRD Sport
    To do the DMZ kit does box removal allow full install of all the plates? Really like the add in that @Torspd did as well :thumbsup:
     
    TodayWasTHeDaY, Dec 12, 2022
    #258
  19. Dec 12, 2022 at 1:30 PM
    #259
    dpanibratets

    #259
    dpanibratets [OP] Well-Known Member

    Joined:
    Sep 18, 2013
    Member:
    #112778
    Messages:
    571
    Gender:
    Male
    First Name:
    Denis
    Vancouver, WA
    Vehicle:
    2005 DCSB soon to be with V8 1UR-FE
    I think you could probably weld in the plates without removing the bed but I am trying to restore the frame and prevent future rust. I am going to give it a good wire wheeling before any fabrication occurs.
     
    dpanibratets, Dec 12, 2022
    #259
    saf023, AllTacosFloat, Torspd and 2 others like this.
  20. Dec 12, 2022 at 1:51 PM
    #260
    nudavinci64

    #260
    nudavinci64 Robert @ Holy Horsepower

    Joined:
    Nov 14, 2013
    Member:
    #116533
    Messages:
    10,146
    Gender:
    Male
    First Name:
    Robert
    San Mateo/Cayucos, CA
    Vehicle:
    13 S/C TRD OffRoad 4x4
    Boosted Money Pit....
    That seems to be the MO of installs. That’s what I hope to do as well.
     
    nudavinci64, Dec 12, 2022
    #260
    dpanibratets[QUOTED][OP] likes this.
Page 13 of 59
To Top