What Have You Done To Your 3rd Gen Today?

As usual. I’m a visual guy.

 

Got full ceramic window tint all the way around. 15% on all the windows and 50% on the windshield. Also threw in some Runnin4tacos blackout side marker lights. Love the way the tint on the windshield dresses it up.

 

Love the Tacoma and 4runner combo. We have that as well. I tinted the side indicator pc on my pro as well

 

holding off on mods for my truck. working on my girls VW Eos. Getting that ready for some mods. Mechanically its sound but would like to do suspension, wheels, Exhaust and tune. its a fun car now but would be more fun with a little more performance. Getting her a new car so the VW will be okay to keep apart if needed.

 

Sharp looking truck!

 

bought some used leafs with ikon AAL. installed yesterday. so far I like it. Wanted stiffer ride for heavy loads but not sure how much stiffer these will be.

 

I have the same set-up and the two work pretty great together. I will say it's a little clunky trying to stake down the annex in a way that doesn't interfere with the awning leg closest to it. The annex isn't really designed for those of us with cab-flush bed racks.

 

What gas cans are you running? Roto? And mount? Curious as I’ve been considering adding spare fuel JIC!

 

Badges are next. Just the. Sr5’s are going V6 was gone before I got the truck the other stuff is blacked out

 

Bilstein 6112, 5100. Spacer block for now.

 

Didn't know you could still get "The Club"

 

Thank you!

 

Nice! I honestly never use the annex, it’s somewhere in my attic lol. But I do love the overhang of it still without it. Thanks for posting the pic! Looks sick

 

$50

 

Did you have to unbolt the seats to get these on?

 

Nice, what rims are those?

 

Just did the RAV4 radio knob upgrade. Much better than stock.

 

Yes, it’s the Rotopax gas cans. I got Qty. 2 of one of the 2gal. varieties:
https://rotopax.com/rotopax/rotopax/

I mounted them onto these mounting hardware which I mounted onto the bed rail track just behind the wheel well:
Toyota/Nissan Truck Plate
https://rotopax.com/toyota-nissan-truck-plate.html?category_id=7
DLX Pack Mount
https://rotopax.com/dlx-pack-mount.html?category_id=7
I have to take a look at it again to see exactly how I mounted it, but I remember it not being a perfect fit and using some washers with possibly some longer bolts to serve as spacers possibly due to some hardware back there that’s used for the DiamondBack cover.

 

Thanks for the info; I've seen both videos. I'm pretty sure I'll just use the AuxBeam as the switch power to the relay, just to be on the safe side.