Wescott Front Lift For Bilstein 5100s

I just saw these for the first time so Im not sure if they were released recently or been out a while Seems like it would be forcing the spring into more preload then the shock was desgned for. Anyone install these?

https://westcottdesigns.net/product/bilstein-5100-preload-collar-lift-kit-front-only/

 

Interesting concept. But $329!

 

Waste of money, just install aftermarket springs instead. OME or Eibach. A thicker bottom collar is no different than using the clips on the 5100's. No matter how you bump the coil upwards, you are still going to run out of travel with the shock after a certain point. Plus most of their kits come with a top plate spacer too. You can buy 1/4" top plate spacers for $20 or less on Amazon. You can use up to 1/2" spacers on the factory tophats so long as you change out the nuts for a thinner style than factory.

I feel like they are doing some false advertisement as well "You will still retain the factory suspension geometry"

The only collars that make sense are for the Factory Fox 2.5 for the Pro's.