Question about Dobinsons lift options

I'm about to get one of their complete lifts for my 2014 long bed four door and am trying to figure out which options to go with as far as springs are concerned. I don't have a heavy bumper or winch and want 2.5" in the front at most. I want a more plush ride, most of my off-road is forest roads, so I'm worried about going with the heavy rate spring #350 vs the light rated #314 which should give 2in of lift. I have a homemade wedge camper that weighs about 350/400 lbs, so between that and camping gear I was leaning towards the 500-800lbs leaf pack, but again I'm worried about it being to stiff. I've read all I can on here about Dobinson lifts but was going someone could give some thoughts about my setup for a plusher ride. I tried calling Exit Off-road but they are closed for the holidays and I want to order soon to take advantage of their November sale. Thanks in advance and here's some truck pics for attention.

 

Thanks crikeymike for getting me squared away!

 

What spring did you end up going with?

@Crikeymike

 

314 for the front set to 2.5" and 111s for the back. Hoping that gets the front and back even without being to firm.

 

Let us know how it works out.

 

How'd you score 111's for the rear? Was told they were backordered so they ended up sending me 112s and I have to take a leaf out.

 

They did the same for me. Supposed to be the same sitting rating but no wait. If so, I'm very happy. Will update when I get it all together.
(Edit)
Anyone recommend a good place to get an alignment done in the Tacoma WA area after the lift is installed? Can always go Les Schwab but if there are any good Taco shops around off target go there.

 

Well, got all my parts today. Now to wait for the weather to get better since I don't have a garage to work in