Which Bilstein 5100 notch and tire size for Gen3 TRD Sport Access Cab?

I have a Gen3 Trd Sport Access Cab and I ordered Bilstein 5100 shocks. Since it's an Access Cab Bilstein states that the 2" notch is not recommended

Which notch should I use to level the truck and looks best? 0.65" or 1.1" or 1.55"

Which tire size should I order since it's an Access Cab? The stock tire size is 265/65R17. I was thinking with a level it should be either 265/70R17 or 275/70R17.

I'm assuming 285/70R17 is too big...

The wheels I ordered have a 0mm offset

Please post pictures of your Gen3 Access Cab if you have any examples

 

https://www.tacomaworld.com/threads/bilstein-5100-settings-for-dummies.638394/

Reference the chart but you need to measure your rear ride height and match it to the front.

I recommend a tiny bit of rake so when you take a small load your nose doesn’t stick in the sky.

265 70 r17 is the sweet spot, very low chance of rubbing, they are bigger and loads of choices.

 

I could opine on what I think looks best, or...

You could take a jack to the front point between the LCAs and raise the truck 0.5, 1, and 1.5". Take pictures of each and see what looks best to you.